Horizontal
Fastwire
CNC CONTOUR CUTTER

The most popular model of the most powerful foam cutting technology

Fixed Table

The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.

Dust Extractor Kits

Dust extractors are large vacuums that remove the dust during the cutting process, minimising the clean-up after jobs. It also helps keep a safer factory for its workers by lowering the amount of airborne dust.

Compatible with a Selection of Abrasive Wires

Three types of abrasive wires have been tested for compatibility and performance with this model. A description and purpose of each wire type can be found on our extras page.

OPTIONAL CONFIGURATIONS
Block Detection

A set of sensors that allow the cutting frame to automatically position itself to the front edge of the block. This saves the operator from manually positioning the machine at the start of each cutting job. This feature is standard with this model.

Compuset Attachment

This attachment is ideal for a company cutting mainly EPS foam but have occasional quantities of rigid foams to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.

Hotwire Attachment

This combination is ideal for a company cutting mainly rigid foam but have occasional quantities of EPS foam to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.

Powered Turntable

A powered turntable is a rotating platform that is built into the table top. It can automatically rotate the block of foam in between cuts. This allows more complex 3D shapes to be cut, easily emulating convoluted contours.

Skid Mount

The machine can be supported on a skid to allow the machine to be used on rough floor or to be moved regularly from site to site without the need to dismantle. This option is often selected for project sites that are remote or away from an industrial factory.

AutoNEST Software

The existing nesting function in Wintech's Profiler software allows efficient nesting of a single shape. The AutoNEST software option can be used in conjunction with the Profiler software for more efficient nesting where variable quantities of different shapes are required in a single cutting job.

Digitiser Tablet

The digitiser tablet can be used for tracing around existing shape templates or actual shapes, creating drawings to be used in the Wintech Profiler software. The drawings can then be conveniently stored on the computer, ready for regular production jobs. This option is ideal for first-time CNC companies, who is looking to automate their manual production flow.

TECH SPECS

Choose a Model Size

We build machines to fit any block size and layout to increase your productivity. Contact us for information on a custom size.

Horizontal Fastwire CNC Cutter

Model: FW-

DIMENSIONS
Machine
Width × Length × Height
2220 × 4600 × 3300 mm
87.4 × 181.1 × 129.9 in
2220 × 6600 × 3300 mm
87.4 × 259.8 × 129.9 in
3120 × 4600 × 3300 mm
122.8 × 181.1 × 129.9 in
3120 × 6600 × 3300 mm
122.8 × 259.8 × 129.9 in
3420 × 4600 × 3300 mm
134.6 × 181.1 × 129.9 in
3420 × 6600 × 3300 mm
134.6 × 259.8 × 129.9 in
3620 × 4600 × 3300 mm
142.5 × 181.1 × 129.9 in
3620 × 6600 × 3300 mm
142.5 × 259.8 × 129.9 in
3920 × 4600 × 3300 mm
154.3 × 181.1 × 129.9 in
3920 × 6600 × 3300 mm
154.3 × 259.8 × 129.9 in
Control Cabinet
Width × Length × Height
1600 × 450 × 1150 mm
63 × 17.7 × 45.3 in
CAPACITY
Foam Type(s)

Ideal for rigid and semi-rigid foam

Able to cut flexible foam and EPS

Cutting Volume
Width × Length × Height
1300 × 3000 × 1250 mm
51.2 × 118.1 × 49.2 in
1300 × 5000 × 1250 mm
51.2 × 196.9 × 49.2 in
2200 × 3000 × 1250 mm
86.6 × 118.1 × 49.2 in
2200 × 5000 × 1250 mm
86.6 × 196.9 × 49.2 in
2500 × 3000 × 1250 mm
98.4 × 118.1 × 49.2 in
2500 × 5000 × 1250 mm
98.4 × 196.9 × 49.2 in
2700 × 3000 × 1250 mm
106.3 × 118.1 × 49.2 in
2700 × 5000 × 1250 mm
106.3 × 196.9 × 49.2 in
3000 × 3000 × 1250 mm
118.1 × 118.1 × 49.2 in
3000 × 5000 × 1250 mm
118.1 × 196.9 × 49.2 in
CONFIGURATIONS
OptionalHotwire Attachment
Powered Turntable
Block Detection
ACCESSORIES
IncludedControl Cabinet
Profiler Software
Remote Operator Handset
OptionalAir Freight Kit
AutoNEST Software
Chain Table
Digitiser
Dust Extractor Kit
Fence Barriers
Light Curtains
Skid
FACTORY FOOTPRINT
Floor PlanRecommended 2000 mm clearance area for service and loading/unloading.
Safety Barriers

Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.

We encourage customers to investigate the safety regulations established by their country, district or workplace.

SPECIFICATIONS
Voltage3 phase and earth
AC PowerStandard builds are 380–420v +/- 10%
Customer specified on order
Frequency50 or 60 HZ +/- 1%
OPERATING CONDITIONS
Temperature0–35˚ Celsius
32–90˚ Fahrenheit
HumidityMaximum of 80% non-condensing

FAQS

How much does a machine cost?

Horizontal Fastwire machines range in price between $125,000 and $165,000 AUD ex-works depending on size and options configured.

How does shipping work?

Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory a Wintech technician will come to assemble and commission the machine, and train the operator.

What is the warranty period?

Wintech provides a 12 month warranty on all machines.

How do we get warranty or after-sales support internationally?

Wintech has authorised agents around the world who have their own service technicians.

Where do we buy replacement cutting wires?

Wintech manufactures and supplies a range of wires suitable for a variety of applications.

Do these machines need a special environment?

The machines themselves can operate in a wide range of temperatures. In extremely hot, cold or dusty factories we recommend placing the control cabinet in a separate temperature controlled operator booth. Wintech Fastwire machines are rugged and able to operate on remote sites in temporary buildings. The control cabinet housing the computer and electronics is air-conditioned and pressurised to provide dust isolation

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

CHOOSE YOUR MODEL