Compuset
CNC CONTOUR CUTTER

A sophisticated machine that loads and positions multiple wires automatically

Fixed Table

The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.

Manual Tilt Adjustment

When sheeting a block of foam, the cutting frame can be manually tilted to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce accurate thickness of each sheet.

Automatic Wire Loading & Positioning

The standard Compuset is fitted with 20 computer controlled wires, which can be attached and stored out of the way until needed. Any number of wires can then be automatically loaded, positioned and unloaded by the computer for a given job. An upgrade to 40 wires is also available.

Integrated Blower System

This feature circulates the air alongside the cutting hotwire, in effect cooling the area around the wire. This prevent overheating which could otherwise break the wire or damage the block edge.

Compatible with a Selection of Wires

Two different wire sizes have been tested for compatibility and performance with this model. A description and purpose of each wire type can be found on our extras page.

OPTIONAL CONFIGURATIONS
Block Detection

A set of sensors that allows the cutting frame to automatically position itself to the front edge of the block. This saves the operator from manually positioning the machine at the start of each cutting job.

Pneumatic Tilt Adjustment

The cutting frame can be upgraded with a pneumatically powered tilting mechanism that is controlled from the control cabinet. When sheeting a block of foam, tilting the cutting frame is recommended to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce accurate thickness of each sheet.

Powered Turntable

A powered turntable is a rotating platform that is built into the table top. It can automatically rotate the block of foam in between cuts. This allows more complex 3D shapes to be cut, easily emulating convoluted contours.

Fastwire Attachment

This attachment is ideal for a company cutting mainly EPS foam but have occasional quantities of rigid or semi-rigid foam to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.

40 Wire Upgrade

The Compuset can be supplied with a total of 40 cutting wires, instead of the standard 20. This increases the potential production output by doubling the number of cuts the machine can make in one pass.

AutoNEST Software

The existing nesting function in Wintech's Profiler software allows efficient nesting of a single shape. The AutoNEST software option can be used in conjunction with the Profiler software for more efficient nesting where variable quantities of different shapes are required in a single cutting job.

Digitiser Tablet

The digitiser tablet can be used for tracing around existing shape templates or actual shapes, creating drawings to be used in the Wintech Profiler software. The drawings can then be conveniently stored on the computer, ready for regular production jobs. This option is ideal for first-time CNC companies, who is looking to automate their manual production flow.

TECH SPECS

Choose a Model Size

We build machines to fit any block size and layout to increase your productivity. Contact us for information on a custom size.

Compuset CNC Cutter

Model: CS-

DIMENSIONS
Machine
Width × Length × Height
1940 × 4600 × 2600 mm
76.4 × 181.1 × 102.4 in
1940 × 6600 × 2600 mm
76.4 × 259.8 × 102.4 in
2840 × 4600 × 2600 mm
111.8 × 181.1 × 102.4 in
2840 × 6600 × 2600 mm
111.8 × 259.8 × 102.4 in
3140 × 4600 × 2600 mm
123.6 × 181.1 × 102.4 in
3140 × 6600 × 2600 mm
123.6 × 259.8 × 102.4 in
3340 × 4600 × 2600 mm
131.5 × 181.1 × 102.4 in
3340 × 6600 × 2600 mm
131.5 × 259.8 × 102.4 in
3640 × 4600 × 2600 mm
143.3 × 181.1 × 102.4 in
3640 × 6600 × 2600 mm
143.3 × 259.8 × 102.4 in
Control Cabinet
Width × Length × Height
1600 × 450 × 1150 mm
63 × 17.7 × 45.3 in
CAPACITY
Foam Type(s)Designed to cut polystyrene
Cutting Volume
Width × Length × Height
1300 × 3000 × 1250 mm
51.2 × 118.1 × 49.2 in
1300 × 5000 × 1250 mm
51.2 × 196.9 × 49.2 in
2200 × 3000 × 1250 mm
86.6 × 118.1 × 49.2 in
2200 × 5000 × 1250 mm
86.6 × 196.9 × 49.2 in
2500 × 3000 × 1250 mm
98.4 × 118.1 × 49.2 in
2500 × 5000 × 1250 mm
98.4 × 196.9 × 49.2 in
2700 × 3000 × 1250 mm
106.3 × 118.1 × 49.2 in
2700 × 5000 × 1250 mm
106.3 × 196.9 × 49.2 in
3000 × 3000 × 1250 mm
118.1 × 118.1 × 49.2 in
3000 × 5000 × 1250 mm
118.1 × 196.9 × 49.2 in
CONFIGURATIONS
IncludedHotwire Gripper Kit (20, 30 or 40 wires)
OptionalBlock Detection
Fastwire Attachment
Pneumatic Tilt
Powered Turntable
ACCESSORIES
IncludedControl Cabinet
Profiler Software
Remote Operator Handset
OptionalAir Freight Kit
AutoNEST Software
Chain Table
Digitiser
Fence Barriers
Light Curtains
Skid
FACTORY FOOTPRINT
Floor PlanRecommended 2000 mm clearance area for service and loading/unloading.
Safety Barriers

Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.

We encourage customers to investigate the safety regulations established by their country, district or workplace.

SPECIFICATIONS
Voltage3 phase and earth
Wire Voltage30 ~ 140 VAC
Microprocessor controlled
AC PowerStandard builds are 380–420v +/- 10%
Customer specified on order
Frequency50 or 60 HZ +/- 1%
OPERATING CONDITIONS
Temperature0–35˚ Celsius
32–90˚ Fahrenheit
HumidityMaximum of 80% non-condensing

FAQS

How much does a machine cost?

Compuset machines range in price between $145,000 and $160,000 AUD ex-works depending on size and options configured.

How does shipping work?

Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory a Wintech technician will come to assemble and commission the machine, and train the operator.

What is the warranty period?

Wintech provides a 12 month warranty on all machines.

How do we get warranty or after-sales support internationally?

Wintech has authorised agents around the world who have their own service technicians.

Where do we buy replacement cutting wires?

Wintech manufactures and supplies a range of wires suitable for a variety of applications.

Do these machines need a special environment?

The machines themselves can operate in a wide range of temperatures. The control cabinet housing the computer and electronics is air-conditioned and pressurised to provide dust isolation. In extremely hot, cold or dusty factories we recommend placing the control cabinet in a separate temperature controlled operator booth.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

CHOOSE YOUR MODEL