Dual-Axis
Oscillating Blade
CNC CONTOUR CUTTER

The most versatile machine for cutting flexible foam

Belt Conveyor Table

The cutting frame stays stationary as the foam moves along a conveyor. This is a motorised positioning belt engineered to move the foam accurately and precisely throughout the cutting process.

Block Detection

A set of sensors that allow the cutting frame to automatically position itself to the front edge of the block. This saves the operator from manually positioning the machine at the start of each cutting job. This feature is standard with this model.

Compatible with a Selection of Blades

Three different blade types that have been tested for compatibility and performance with this model. A description and purpose of each blade type can be found on our extras page.

OPTIONAL CONFIGURATIONS
Block Centre Guide

This powered arm holds the centre of the blade to improve the accuracy and speed when cutting small high-density foam blocks. It automatically and seamlessly integrates with the cutting motion. The centre guide also has twist action to match the gearboxes and does not interfere with the blade rotation mechanism.

Block Support

This is a set of motorised rollers that lightly press down on the block to stabilise the material during cutting. Their movement is synchronised with the conveyor belt speed and sit adjacent to the blade. The device can be safely parked on the machine when not in use.

Infeed and Exit Conveyors

These conveyors automate the entry and exit of foam so the operator does not need to remain at the machine during these processes. They provide a full process-line functionality to the machine to maximise productivity. Some factories have a single operator running three machines because of this feature.

Turntable

A turntable is a thin flat platform that easily snaps to the top of the conveyor belt. It positions the block of foam throughout the cutting process; it can also be rotated manually 90˚ in between cuts. This allows more complex 3D shapes to be cut, easily emulating convoluted contours. The turntable can be kept on the machine or quickly detached and stored when not in use.

AutoNEST Software

The existing nesting function in Wintech's Profiler software allows efficient nesting of a single shape. The AutoNEST software option can be used in conjunction with the Profiler software for more efficient nesting where variable quantities of different shapes are required in a single cutting job.

Digitiser Tablet

The digitiser tablet can be used for tracing around existing shape templates or actual shapes, creating drawings to be used in the Wintech Profiler software. The drawings can then be conveniently stored on the computer, ready for regular production jobs. This option is ideal for first-time CNC companies, who is looking to automate their manual production flow.

TECH SPECS

Dual-Axis Oscillating Blade CNC Cutter


DIMENSIONS
Machine
Width × Length × Height
3660 × 6000 × 2730 mm
144.1 × 236.2 × 107.5 in
Control Cabinet
Width × Length × Height
1600 × 450 × 1150 mm
63 × 17.7 × 45.3 in
CAPACITY
Foam Type(s)Designed to cut flexible foam
Cutting Volume
Width × Length × Height
2200 × 1280 × 2500* mm
86.6 × 50.4 × 118 in

*Longer lengths possible
CONFIGURATIONS
OptionalBlock Centre Guide
Block Detection
Block Support
ACCESSORIES
IncludedControl Cabinet
Profiler Software
Remote Operator Handset
OptionalAutoNEST Software
Digitiser
Infeed and Exit Conveyors
Fence Barriers
Light Curtains
Manual Turntable (for Horizontal only)
FACTORY FOOTPRINT
Floor PlanRecommended 2000 mm clearance area for service and loading/unloading.
Safety Barriers

Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.

We encourage customers to investigate the safety regulations established by their country, district or workplace.

SPECIFICATIONS
Voltage3 phase and earth
AC PowerStandard builds are 380–420v +/- 10%
Customer specified on order
Frequency50 or 60 HZ +/- 1%
OPERATING CONDITIONS
Temperature0–35˚ Celsius
32–90˚ Fahrenheit
HumidityMaximum of 80% non-condensing

FAQS

How much does a machine cost?

Dual-Axis Oscillating Blade machines range in price between $250,000 and $300,000 AUD ex-works depending on options configured.

How does shipping work?

Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory a Wintech technician will come to assemble and commission the machine, and train the operator.

What is the warranty period?

Wintech provides a 12 month warranty on all machines.

How do we get warranty or after-sales support internationally?

Wintech has authorised agents around the world who have their own service technicians.

Where do we buy replacement cutting blades?

Wintech manufactures and supplies a range of blades suitable for a variety of applications.

Do these machines need a special environment?

The machines themselves can operate in a wide range of temperatures. The control cabinet housing the computer and electronics is air-conditioned and pressurised to provide dust isolation. In extremely hot, cold or dusty factories we recommend placing the control cabinet in a separate temperature controlled operator booth.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

We value your privacy and won't spam you.

CHOOSE YOUR MODEL