Low-Profile
Vertical Fastwire
CNC CONTOUR CUTTER

Engineered to meet the needs of the wind turbine industry

Belt Conveyor Table

The cutting frame stays stationary as the foam moves along a conveyor. This is a motorised positioning belt engineered to move the foam accurately and precisely throughout the cutting process.

Low Throat

This low height is designed for cutting contours from sheets of foam, rather than full size blocks. The compact cutting height means there is less lag in the wire so cutting is done quicker without any loss in accuracy.

Block Detection

A set of sensors that allows the cutting frame to automatically position itself to the front edge of the block. This saves the operator from manually positioning the machine at the start of each cutting job. This feature is standard with this model.

Pneumatic Tension

The abrasive wire requires tensioning to ensure an accurate cut and optimal performance. The original manual tension control has been replaced with a pneumatic self-adjusting tensioning system that allows the ideal tension to be placed on the wire without operator interaction.

Dust Extractor Kits

Dust extractors are large vacuums that remove the dust during the cutting process, minimising the clean-up after jobs. It also helps keep a safer factory for its workers by lowering the amount of airborne dust.

Compatible with a Selection of Abrasive Wires

Three types of abrasive wires have been tested for compatibility and performance with this model. A description and purpose of each wire type can be found on our spare parts page.

OPTIONAL CONFIGURATIONS
Infeed and Exit Conveyors

These conveyors automate the entry and exit of foam so the operator does not need to remain at the machine during these processes. They provide a full process-line functionality to the machine to maximise productivity. Some factories have a single operator running three machines because of this feature.

AutoNEST Software

The existing nesting function in Wintech's Profiler software allows efficient nesting of a single shape. The AutoNEST software option can be used in conjunction with the Profiler software for more efficient nesting where variable quantities of different shapes are required in a single cutting job.

Digitiser Tablet

The digitiser tablet can be used for tracing around existing shape templates or actual shapes, creating drawings to be used in the Wintech Profiler software. The drawings can then be conveniently stored on the computer, ready for regular production jobs. This option is ideal for first-time CNC companies, who is looking to automate their manual production flow.

POPULAR USES

popular uses wintech machine checkmark icon

Custom Contours

Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.

popular uses wintech machine checkmark icon

Diverse Materials

This machine is a great choice for companies who work with a wide variety of foam types. It can cut through any type of foam that a project requires, from flexible, rigid, semi-rigid to heavy syntactic foams.

popular uses wintech machine checkmark icon

Wind Turbine Industry

This model is specifically designed to meet the needs the wind turbine industry. The short vertical wire increases the speed and precision of a cutting job, while the lower cutting head is an acceptable trade off as the industry deals with short runs of pre-sheeted foam.

TECH SPECS

Low-Profile Vertical Fastwire CNC Cutter

DIMENSIONS
Machine
Width × Length × Height		3150 × 6000 × 1680 mm
124 × 236.2 × 66.1 in
Control Cabinet
Width × Length × Height		1600 × 450 × 1150 mm
63 × 17.7 × 45.3 in
CAPACITY
Foam Type(s)

Ideal for rigid and semi-rigid foam

Able to cut flexible foam and EPS

Cutting Volume
Width × Length × Height		1300 × 3000 × 300 mm
51.2 × 118.1 × 11.8 in
CONFIGURATIONS
OptionalBlock Detection
Pneumatic Tension
ACCESSORIES
IncludedControl Cabinet
Profiler Software
Remote Operator HandsetControl Cabinet
Profiler Software
Remote Operator Handset
OptionalAutoNEST Software
Digitiser
Dust Extractor Kit
Infeed and Exit Conveyors
Fence Barriers
Light Curtains
FACTORY FOOTPRINT
Floor PlanRecommended 2000 mm clearance area for service and loading/unloading.
Safety Barriers

Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.

We encourage customers to investigate the safety regulations established by their country, district or workplace.

SPECIFICATIONS
Voltage3 phase and earth
AC PowerStandard builds are 380–420v +/- 10%
Customer specified on order
Frequency50 or 60 HZ +/- 1%
OPERATING CONDITIONS
Temperature0–35˚ Celsius
32–90˚ Fahrenheit
HumidityMaximum of 80% non-condensing

FAQS

How much does a machine cost?

Low-Profile Vertical Fastwire machines range in price between $200,000 and $235,000 AUD ex-works depending on options configured.

How does shipping work?

Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory a Wintech technician will come to assemble and commission the machine, and train the operator.

What is the warranty period?

Wintech provides a 12 month / 2000 hours warranty on all machines.

How do we get warranty or after-sales support internationally?

Wintech has authorised agents around the world who have their own service technicians.

Where do we buy replacement cutting wires?

Wintech manufactures and supplies a range of wires suitable for a variety of applications.

Do these machines need a special environment?

The machines themselves can operate in a wide range of temperatures. The control cabinet housing the computer and electronics is air-conditioned and pressurised to provide dust isolation. In extremely hot, cold or dusty factories we recommend placing the control cabinet in a separate temperature controlled operator booth.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

Your privacy is important to us and you may unsubscribe at any time.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

Your privacy is important to us and you may unsubscribe at any time.

CHOOSE YOUR MODEL

GO BACK

Fastwire
Machines

Horizontal
Fastwire

Twin
Fastwire

Dual-Axis
Fastwire

Vertical
Fastwire