A sophisticated machine that loads and positions multiple wires automatically

Fixed Table

Our Fixed Table machines are available in a range of sizes to suit the work and operational needs of our customers. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting multiple blocks at a time.
High-quality bearings allow the cutting frame to move along the long edge of the table.

Manual Tilt Adjustment

To increase the accuracy and quality of cut when sheeting a block of foam, the cutting frame can be tilted to ensure a clean cut as the wires exit the block. Our Wintech Profiler software compensates for the angle of tilt to ensure accurate thickness of each sheet.

Automatic Wire Loading & Positioning

The Standard computer-controlled Compuset post is fitted with 20 wires, these are attached and stored out of the way until needed. Any number of wires can then be automatically loaded, positioned, or unloaded by the computer depending on job requirements. An upgrade to 40 wires is also available.

Integrated Blower System

This feature circulates air along the cutting wire, cooling the area around the wire prevents overheating which can lead to wire breakage or damage to the block edge.

Compatible with a Selection of Wires

Two different wire sizes have been tested for compatibility and performance with this model. A description and purpose of each wire type can be found on our spare parts page.

Block Detection

A set of sensors automatically positions the cutting frame at the front edge of the block. This provides labor efficiencies by saving the operator from manually positioning the machine at the start of each cutting job.

Pneumatic Tilt Adjustment

The cutting frame can be upgraded with a pneumatically powered tilting mechanism that is controlled from the control cabinet. When sheeting a block of foam, tilting the cutting frame is recommended to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce an accurate thickness of each sheet.

Powered Turntable

A powered, rotating platform built into the tabletop automatically rotates the block of foam between cuts. This allows more complex 3D shapes to be cut, easily emulating convoluted contours.

Fastwire Attachment

This attachment is ideal for companies cutting mainly EPS foam but also has occasional quantities of rigid or semi-rigid foam to cut. Combining cutting technologies is a unique Wintech offering. Read more about combo cutters.

40 Wire Upgrade

This increases the potential production output by doubling the number of cuts the machine can make in one pass. Increase the standard 20 wire Compuset posts to hold up to 40 automatically loaded wires.

AutoNEST Software

AutoNEST is optional software that can be used in conjunction with Wintech Profiler to increase the efficiency of nesting when variable quantities of different shapes are required in a single cutting job.

Digitiser Tablet

A digitizer tablet provides the ability to trace around existing templates or actual shapes, which then creates the drawings to be used by the Wintech Profiler software. The drawings can be stored on the computer for regular production jobs. This is an ideal option for new CNC owners looking to automate their manual production flow.


Choose a Model Size

We build machines to fit any block size and layout to increase your productivity. Contact us for information on a custom size.

Compuset CNC Cutter

Model: CS-

Width × Length × Height
1940 × 4600 × 2600 mm
76.4 × 181.1 × 102.4 in
1940 × 6600 × 2600 mm
76.4 × 259.8 × 102.4 in
2840 × 4600 × 2600 mm
111.8 × 181.1 × 102.4 in
2840 × 6600 × 2600 mm
111.8 × 259.8 × 102.4 in
3140 × 4600 × 2600 mm
123.6 × 181.1 × 102.4 in
3140 × 6600 × 2600 mm
123.6 × 259.8 × 102.4 in
3340 × 4600 × 2600 mm
131.5 × 181.1 × 102.4 in
3340 × 6600 × 2600 mm
131.5 × 259.8 × 102.4 in
3640 × 4600 × 2600 mm
143.3 × 181.1 × 102.4 in
3640 × 6600 × 2600 mm
143.3 × 259.8 × 102.4 in
Control Cabinet
Width × Length × Height
1600 × 450 × 1150 mm
63 × 17.7 × 45.3 in
Foam Type(s)Designed to cut polystyrene
Cutting Volume
Width × Length × Height
1300 × 3000 × 1250 mm
51.2 × 118.1 × 49.2 in
1300 × 5000 × 1250 mm
51.2 × 196.9 × 49.2 in
2200 × 3000 × 1250 mm
86.6 × 118.1 × 49.2 in
2200 × 5000 × 1250 mm
86.6 × 196.9 × 49.2 in
2500 × 3000 × 1250 mm
98.4 × 118.1 × 49.2 in
2500 × 5000 × 1250 mm
98.4 × 196.9 × 49.2 in
2700 × 3000 × 1250 mm
106.3 × 118.1 × 49.2 in
2700 × 5000 × 1250 mm
106.3 × 196.9 × 49.2 in
3000 × 3000 × 1250 mm
118.1 × 118.1 × 49.2 in
3000 × 5000 × 1250 mm
118.1 × 196.9 × 49.2 in
IncludedHotwire Gripper Kit (20, 30 or 40 wires)
OptionalBlock Detection
Fastwire Attachment
Pneumatic Tilt
Powered Turntable
IncludedControl Cabinet
Profiler Software
Remote Operator Handset
OptionalAir Freight Kit
AutoNEST Software
Chain Table
Fence Barriers
Light Curtains
Floor PlanRecommended 2000 mm clearance area for service and loading/unloading.
Safety Barriers

Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.

We encourage customers to investigate the safety regulations established by their country, district or workplace.

Voltage3 phase and earth
Wire Voltage30 ~ 140 VAC
Microprocessor controlled
AC PowerStandard builds are 380–420v +/- 10%
Customer specified on order
Frequency50 or 60 HZ +/- 1%
Temperature0–35˚ Celsius
32–90˚ Fahrenheit
HumidityMaximum of 80% non-condensing


How much does a machine cost?

Compuset machines range in price between $145,000 and $160,000 AUD ex-works depending on size and options configured.

How does shipping work?

Small machines can simply be wheeled into a shipping container and secured. Larger machines must be dismantled to fit into a container. On arrival at the factory, a Wintech technician will come to assemble and commission the machine and train the operator.

What is the warranty period?

Wintech provides a 12 month warranty on all machines.

How do we get warranty or after-sales support internationally?

Wintech has authorised agents around the world who have their own service technicians.

Where do we buy replacement cutting wires?

Wintech manufactures and supplies a range of wires suitable for a variety of applications.

Do these machines need a special environment?

The machines themselves can operate in a wide range of temperatures. The control cabinet housing the computer and electronics are air-conditioned and pressurized to provide dust isolation. In extremely hot, cold, or dusty factories we recommend placing the control cabinet in a separate temperature-controlled operator booth.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

Your privacy is important to us and you may unsubscribe at any time.

Thank you, your submission has been received.
There was a problem with your submission, please check all required fields.
There was a problem with your submission, please try again later.

Your privacy is important to us and you may unsubscribe at any time.